POWDER THIEF 
675 1030

• Made from high quality 316 stainless steel
• Wide range of sizes
• Simple to use

LENGTH 300 mm - 2000 mm
VOLUME .25 ml - 100 ml
SLEEVE SAMPLER 
675 1035

• Single Point
• 316 stainless steel, bright finish
• Adjustable Length - use extension rods 
  to make the sampler the required length

LENGTH 1000 mm - 3000 mm
VOLUME 100 ml - 200 ml
POCKET SAMPLER  
675 1220

Multilevel Sampler for taking  
discrete samples

LENGTH 300 mm - 2000 mm
VOLUME PER POCKET 15 ml - 90 ml
SACK SAMPLER
675 1320

• Single point
• 316 stainless steel or HDPE
Available w bottle holder, or plain cap / no cap

LENGTH 400 mm - 420 mm
VOLUME  UP TO 500 ml
VARIABLE VOLUME MULTI LEVEL  
675 1290

• 316 stainless steel construction
• Variable sample volumes 5ml to 60ml
• Range of sampler lengths
• Suitable for free flowing powders and granules

LENGTH 1000 mm - 2000 mm
VOLUME 5 ml - 60 ml per pocket
QAQC LAB Samplers are made from a variety of materials, including 316 grade stainless steel, polypropylene, and HDPE (FDA ACCEPTABLE), depending on the sampling
 application, as well as in a variety of sizes. Sterile (GAMMA IRRADIATED) samplers are available for pharmaceutical, and food applications. 

Inline powder and liquid samplers, including the world's first inline powder sampler that is guaranteed not to stick or jam during operation (Freeglide), are available, 
with either manual or pneumatic operation.
WHITESTONE VA
TEL (804) 318-3686 FAX (703) 991-7133
INFORMATION@QCLABEQUIPMENT.COM 
WWW.QCLABEQUIPMENT.COM
Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved.
804-318-3686 | sales@qclabequipment.com
INLINE POWDER SAMPLER
MANUAL OR PNEUMATIC OPERATION
SLEEVE SAMPLER  JUMBO
675 1213
Made from 316 stainless steel.

LENGTH 1000 mm
VOLUME 150 ml
SINGLE ZONE SAMPLERS
MULTI ZONE & CROSS SECTIONAL SAMPLERS
POWER AUGER SAMPLER
675 1215
POWER SAMPLER FOR 
COHESIVE OR FREE 
FLOWING POWDERS
MICRO THIEF
675 1074

• Made from high quality 316 stainless steel
• Adjustable - takes a range of sample sizes
• Simple to use

LENGTH 350 mm - 500 mm
VOLUME Variable between 0.01 and 0.1ml
MICROMATE
675 1070

• Made from high quality 316 stainless steel
• Adjustable - takes a range of sizes
• Simple to use

LENGTH 350 mm - 500 mm
VOLUME VARIABLE TO .1 ml
UNIT DOSE SAMPLE THIEF
675 1245

• Multilevel Unit Dose Sampling
• Take one, two or three samples at each sampling height
• 316 stainless steel

VOLUME MADE TO ORDER
SLEEVE SAMPLER UNIT DOSE
675 1500S

• Single Point Unit Dose Sampler
• 316 stainless steel
• Use extension rods to increase the 
   length of the sampler

LENGTH 600 mm - 1200 mm
VOLUME .1 ml - 2.5 ml
COHESIVE SAMPLER UNIT DOSE
675 2015

• Single Point Unit Dose
• 316 stainless steel
• Suitable for use with sticky, 
  cohesive powders

LENGTH 1000 mm
VOLUME .25 ml - 1.0 ml
POWDER LANCE CROSS SECTIONAL​
675 2250

• Cross sectional sampler
• 316 stainless steel
• Suitable for sticky cohesive powders

190 ml - 520 ml
POCKET SAMPLER COHESIVE
675 2220

• Multilevel (discrete samples)
• 316 Stainless steel construction
• Suitable for sticky, cohesive powders

LENGTH 600 mm - 1500 mm
VOLUME PER POCKET 15 ml - 20 ml
INLINE & POWER SAMPLERS
EQUIPMENT FOR QUALITY CONTROL AND R&D 
www.qclabequipment.com
Telephone      (804) 318-3686
Toll Free US   (866) 244 1578
Fax                  (703) 991-7133
Hours      8 AM - 6 PM EST
INTERNATIONAL & DOMESTIC SALES
CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT


DELIVERIES WORLDWIDE

PERFORMANCE GUARANTEE
CEMENT SAMPLER
675 1120A01

• Lightweight
• Easy to use
• Cross sectional sample
• Patented design

LENGTH 2000 mm
VOLUME 8 LITERS
UNIT DOSE MASTER SAMPLER
675 1230

• Manufactured from 316 stainless steel
• Satin polish (Ra< 1microns)
• Take Multiple Samples from the same Point
• Range of sampler lengths
• Change the sample volume by changing the insert
• Special finishes and materials of construction
  available on request

LENGTH 300 mm - 1800 mm
VOLUME PER SAMPLE INSERT .1 ml - 4.0 ml
​Before any analytical test can be conducted, a representative sample of the material to be analyzed, needs to be collected. 
COHESIVE SAMPLER
675 2015

• Single Point
• 316 stainless steel
• Suitable for cohesive powders

VOLUME 5 ml - 25 ml
SLOT SAMPLER 
675 1210

• Cross section, composite sample
• Suitable for taking large volume samples

LENGTH 300 mm - 2500 mm
VOLUME 45 ml - 2900 ml
DISPOSABLE POINT SAMPLER​
675 8240H
HDPE (AVAILABLE STERILE)

LENGTH 1000 mm
VOLUME 100 ml
20 PER BOX
DISPOSABLE POWDER THIEF
675 8060H
HDPE (AVAILABLE STERILE)

LENGTH 500 mm - 1000 mm
VOLUME SAMPLED 1 ml - 20 ml
20 PER BOX
DISPOSABLE POWDER LANCE
675 8063H
HDPE (AVAILABLE STERILE)

LENGTH 400 mm - 950 mm
VOLUME 75 ml - 200 ml

DISPOSABLE SLOT SAMPLER
675 8073H

HDPE (AVAILABLE STERILE)

LENGTH 620 mm - 1000 mm
VOLUME 100 ml - 500 ml
DISPOSABLE SACK SAMPLER 
675 8085A

HDPE (AVAILABLE STERILE)

LENGTH 400 mm
100 PER BOX
Special range of unit dose samplers for pharmaceutical sampling to meet the latest GMP and FDA guidelines. Both powder samplers and liquid unit dose samplers are available.
SAMPLING EQUIPMENT FOR POWDERS, GRANULARS, AND SOLIDS
POINT SAMPLER
675 1640

• Large 100 ml sample size
• For use with free flowing and cohesive powders
• 316 Stainless Steel

LENGTH 1000 mm - 2000 mm
VOLUME 100 ml
USE WITH RACK OR 
SEALING SLEEVES
REMOVABLE VARIABLE 
VOLUME CELLS
UNIT DOSE & SMALL VOLUME SAMPLERS
TELESWAB
675 8011K

The sampler comes complete with an extendable handle that
can be extended to the correct length for easy swabbing. An
adjustable adapter allows the swabs etc. to be angled to meet
the contours of the item being sampled.

LENGTH 830 mm - 3200 mm
SAMPLE CORERS FOR wax, cheese, greases
ICE SAMPLERS
SOLIDS & SPECIAL SAMPLERS
SOIL SAMPLER
675 1620A01
Cross Sectional Soil Sampler

LENGTH 1000 mm
EJECTION ROD 1100 mm
TELESCOOP
675 5065

The QAQC TeleScoop is suitable for taking samples from liquids and suspensions.
Special tip available for powder sampling.

LENGTH 720 mm - 6000 mm
INLINE POWDER SAMPLER
MANUAL OR AUTOMATIC OPERATION
PIPE DIAMETER 100mm to 300mm
675 FG (xxx m/a)
GLOVEBOX SAMPLER

When folded 450mm long
(smaller versions can be made - please ask for details)
Powder Sampling Head
Range of sample
volumes available:
5, 10 & 20ml
See page 47 for a
description of this
style of sampling tip.
POWDER SPATULA
POWDER SPATULA WITH PROTECTIVE COVER
MICRO SPATULAS
FOR LOW VOLUME POWDER

MANUFACTURING
DISTRIBUTION
TECHNICAL SERVICES ​FOR
ANALYTICAL INSTRUMENTATION

TELEPHONE (804) 318-3686
TOLL FREE   (866) 244-1578