MICRO HAMMER/CUTTER MILL
VERSATILE LABORATORY GRINDER WITH VARIABLE SIZE CONTROL
Suitable for all dry milling applications in the lab, and designed with a more powerful motor than it's predecessor, the Micro Hammer/Cutter Mill has an integrated frequency inverter with LED-display, and a new designed milling chamber with exchangeable grinding attachments.
MICRO HAMMER CUTTER MILL
LABORATORY GRINDER 601 MHCM
Special Features:

•Speeds up to 6,000 rpm

•Low noise level due to brushless 3-phase AC motor

•Integrated overheating, overload and blocking protection

•Safety switch for automatic - OFF

•Energy saving through automatic standby-mode

•Milling chamber with attached funnel and rotary slide for product 
 inlet dosage, intercepting tubes and NS29 vessels can be 
 attached to milling chamber outlet. 

•Milling chamber can be equipped with sieves in difference mesh
 sizes from 0.2mm up to 6.00mm

•Milling chamber parts in contact with the product made from 
 stainless steel hardened

•Base frame made from anodized aluminum with integrated handle


Technical Data:

•Working Volume (funnel) Approx. 300ml (volume of the funnel)
  Motor Type/power 3-phase AC motor up to 1000W input 
  up to 600W output

Supply Voltage / frequency 230V / 50Hz or 100/ 60 Hz

•Speed Range 50-6,000 rpm

•Dimensions/Weight 251 x 325 x 480/approx 12 kgs

•Noise Emission (drive only) Lower 70dB(A) at 6,000 rpm (no load)

•Environment 0-40 C, 95% rel. humidity

•Protection Class IP 20

•Certified Standards EMC according to IEC / EN 61000-6- EN 61000-6-3

•Safety according to IEC / EN 61010-2-51
The POLYMIX MICRO HAMMER CUTTER MILL, is a lab mill, suited for grinding batches of dry substances. 
By exchanging the grinding geometries the mill can be converted into a hammer mill or a cutting mill.
MILLING CHAMBER CAN BE EQUIPPED WITH SIEVES IN DIFFERENT MESH SIZES, FROM .2 mm to 6.0 mm
WHITESTONE VA
TEL (804) 318-3686 FAX (703) 991-7133
[email protected] 
WWW.QCLABEQUIPMENT.COM
Copyright 2012: QAQC Lab | Particle Measurement System | All rights reserved.
804-318-3686 | [email protected]
BUY ONLINE 
BROCHURE
EQUIPMENT FOR QUALITY CONTROL AND R&D 
www.qclabequipment.com
Telephone      (804) 318-3686
Toll Free US    (866) 244 1578
Fax                   (703) 991-7133
Hours      8 AM - 6 PM EST
INTERNATIONAL & DOMESTIC SALES
CUSTOMER SERVICE * SALES * TECHNICAL SUPPORT


DELIVERIES WORLDWIDE

PERFORMANCE GUARANTEE
MICRO HAMMER/CUTTER MILL complete with HAMMER MILL ATTACHMENT 
Consisting of rotor with 3 impact hammers and stator with place
for one exchangeable sieve. The impact grinding mill attachment is designed for
processing dried, non-fatty, hard and brittle products such as cereals, corn,
malt, raw & roasted coffee beans, oats, nutshells, bones, fins (fish), gravel,
stone, amber, mortar etc.
MICRO HAMMER/CUTTER MILL complete with BLADE MILL ATTACHMENT
Consisting of rotor with 3 attached blades and stator with place for one
exchangeable sieve. The blade grinding mill attachment is designed for
processing dried, non-fatty, stringy and ductile products such as wood, bark,
roots, leaves, straw, cork, dried fruits, dried degreased meal, adenoids, fish,
feather, leather, dermis, wool, cotton, leashed paper, coal, turf, dried resins,
synthetic materials, fibre glass, plastic pellets, different textiles, felt etc.
Milling chamber with attached 
funnel and rotary slide for product 
inlet dosage, intercepting tubes 
and NS29 vessels can be attached 
to milling chamber outlet. 
OPERATING INSTRUCTIONS 
MICRO HAMMER CUTTER MILL
SAMPLE COMPARISON ON OCCHIO ZEPHYR DIGITAL IMAGE ANALYZER, BETWEEN SAMPLE GROUND WITH 1 mm SIEVE and 2 mm SIEVE
CLICK IMAGE FOR VIDEO DEMONSTRATION.
MANUFACTURING
DISTRIBUTION
TECHNICAL SERVICES ​FOR
ANALYTICAL INSTRUMENTATION

TELEPHONE (804) 318-3686
TOLL FREE   (866) 244-1578

COMPLETE INTERACTIVE SAMPLER CATALOGUE
PDF DOWNLOAD
QUOTE REQUEST